Smart PDU 8-way IEC320 C13, switchable, with monitoring functions
- Current, voltage (total input) measurement over IP
- Built-in temperature and humidity sensor, can set up two level values of warning and overload
- Control via web browser. Support TCP/IP, UDP, HTTP, DHCP and DNS
- LED indicates power supply condition, voltage and current
- Voltage: 110-240 V 50/60 Hz (max. 3680 W)
- Input socket type: 1x IEC 320-C20 , output socket type: 8x IEC 320-C13
- Protection: 16 A overload protection, lightning protection
- Voltage measurement range: 90-264VAC resolution 1 V
- Current working range: 0-20 A resolution 0.1 A
- Temperature measurement range: 0-50°C resolution 1°C, humidity measurement range: 20-90%RH resolution 1%RH
- Including power cable IEC 320, C19 to C20, 1.8 m
- Including additional management software
PDU8P01
The PDU8P01 ensures a safe and stable power supply for servers. It monitors the power consumption and environmental conditions of the connected devices, providing relevant information and taking warning and shutdown measures in case of overload. Users can access the device via the network to check its current status and control the opening and closing of each output port, enabling remote server restarts.
Product questions
Responsible entity
Brand: LogiLink
Manufacturer: 2direct GmbH
Registered address: Langenstück 5, 58579 Schalksmühle, Germany
Phone: +49 2351 66887-0
Fax: +49 2351 66887-29
Email: info@2direct.de
Information on safe use:
Use only as intended. Do not connect the power strip to an ungrounded socket. Do not use it with extension cables or adapters that interrupt the grounding connection. The power strip is intended exclusively for use in dry indoor areas. Do not install it near heat-emitting devices such as radiators or heat registers. Do not install it in areas with excessive moisture or other conductive contaminants. Do not expose it to water or start disassembling it. Do not connect devices one after another in a series chain. Do not cover it. Never install electrical wiring during a thunderstorm. The power demand of each device connected to the power strip must not exceed the power strip's output power. The total power demand of all devices connected to the power strip must not exceed its maximum load capacity. It is de-energized only when the plug is removed.